Specifications

www.meitavtec.com | [e-mail] 7-6
Maxinet – Thermostat Networ
k
CTU1800- Main Controller B.M.S - Maxinet protocol
Main DDC Controller for Maxinet BMS application
The CTU 1800 are smart, ready to install controller,
especially developed to work with the Maxinet SW.
The CTU1800 family Pre-Programmed, "Plug and Play" to
save valued time for the installers on site.
y Main Input- 230VAC , 110VAC or 24VAC
y RS-485 Communication port – proprietary Maxinet
protocols.
y Panel interface to various designs Wall/flush mount/IR
panels - optional
y Inputs
* 8 x Digital Inputs
* 2 x Analog inputs (0-10VDC)
* 3 x Temperature Sensor inputs
y Outputs
* 8 x Digital Outputs (24VAC 110VAC or 230VAC –
based on the supply voltage)
* 2 x Analog Outputs (0-10VDC)
* 2 x 3-wire 24VAC (Open-Common-Close)
y 12VDC power supply for occupancy sensor
y Adjustable Set point limits for cooling and
heating
y Offset – for temperature reading adjustment
y IR input
y 2 indication LEDs
y MAC address 1-255 by DIP switch
y 4 DIP switches for configuration purposes
y DIN rail connection
y CE certified
y Energy saving – cost effective, environmentally
friendly controller
Application
CTU Fan-Coil controllers
Outputs operation
FC-SUPER On/Off
P-FC-SUPER 0-10VDC proportional for Valve/Fan
PM2 3 wire (Open/Common/Close) 24VAC
CTU Air Condition controller
AC-SUPER Compressor & Heat Pump outputs
WSHP (Water Source Heat Pump) Compressor & Heat Pump
COMPATIBLE
B.M.S
AC
COOL
HEAT
AUTO FAN
ECONOMY
EXT.
SENSOR
OPTION
°F
°C
RT03