Specifications

www.meitavtec.com | [e-mail] 7-3
Maxinet – Thermostat Networ
k
PS1800- Main controller - MaxiNet protocol
Main Controller for A/C and Fan coil in Building
Management System (BMS) application, with
Maxinet protocol
The PS1800 Family consist of main controllers, with
MaxiNet Protocol, for A/C and Fan Coil MaxiNet BMS
applications. It has a modular, user-friendly design with
various A/C or Fan Coil applications built-in, field
selectable. This modularity allows you to have one main
controller for different A/C or Fan Coil applications and
suit it according to customer’s needs on the spot.
The PS1800 Family also offers cost efficient capabilities,
such as, occupancy sensor, and smart algorithm for
maximum energy saving.
Each of the PS1800 controllers are factory pre-
programmed to save valued time on field programming.
Please note the PS1800 is also available as a
CTU1800, with additional advanced features.
Features
y Main Input - 230VAC
y RS-485 Maxinet protocol
y Main controller for multi AC or Fan Coil applications
y Inputs
* 8 x Digital Inputs
* 3 x Temperature sensor inputs
y Outputs
* 8 x Digital Outputs
* 2 x 0-10VDC
* 3-wire 24VAC (Open – Common – Close)
y Wall or flush mount panels available
y MAC address 1-255 by DIP switch
y Occupancy Sensor - 12VDC supply
y Ambient Temperature reading from panel or from
main board - selectable
y Celsius or Fahrenheit temperature display
y Lock pushbuttons - option
y Offset for temperature reading
y Set point limits - 10°…30°C , 50…86 °F
Available also in 24V configuration
COMPATIBLE
B.M.S
AC
COOL
HEAT
SPEEDS
13
/
COMPRESSOR
DELAY
ECONOMY
EXT.
SENSOR
OPTION
FAULT
INPUT
Application
PS Fan-Coil controllers Outputs operation
FC-SUPER On/Off
P-FC-SUPER 0-10VDC proportional for Valve/Fan
PM2 3 wire (Open/Common/Close) 24VAC
PS Air Condition controller
AC-SUPER Compressor & Heat Pump outputs
°F
°C
RT03