Specifications

www.meitavtec.com | [e-mail] 5-7
Fan Coil Stand Alone Controllers
FMH-FC-SUPER4
Flush-Mount, 230VAC or 110VAC Thermostat for all
Fan Coil applications, with a special contact input.
The FMH-FC-SUPER4 is a highly versatile thermostat
suitable for various Fan Coil applications. It can be flush-
mounted or installed directly into the Fan Coil, with an
external sensor for the return air and water temperature.
The FMH-FC-SUPER4 also offers several DIP Switch
selectable options to best suit customer's needs, e.g. Auto-
Change-Over sensor, Soft-start for fan or a Contact Input.
When the special contact input is selected, it allows 1 of 3 options:
1- Contact input for a remote switch, which changes the Mode of one or many thermostats linked.
2- Contact input for a remote switch that activates Economy mode.
3- Contact input to turn units off.
Features
y Flush-Mount, 230VAC or 110VAC, Thermostat
y Suitable to various Fan Coil systems:
* 4 pipe system – 2 valves
* 2 pipe system – 1 valve
* Fan Coil – no valve
y Modes: Cool, Heat, Auto, Fan Only
y 3 fan speed control + Auto
y DIP switch control options:
* Auto-Change-Over sensor & Fan Soft-
Start in Heat / Contact input
* Display of set temperatures only /
Display of set-point & room temp.
* Always Auto-Fan / Auto-Fan selectable
* With / without Auto-Change-Over mode
* Internal / External sensor
y Auto-change over sensor - mode is set based
on temperature of the incoming water flow,
ideal for 2-pipe systems.
y Special Contact Input (remote switch - close/ open) can be
set to work in one of the following modes:
* Mode selection – remote switch sets the mode
(Cool/Heat) to one or more thermostats linked
together (ideal for hotel bedrooms or offices).
* Economy Mode - unit reverts to pre-defined
economy set points
* Contact input to turn the unit Off
y Soft-Start logic in Heat for the Fan – adjustable delay time
y T2 soft-start in Cool & Heat – adjustable temperature to
start fan
y Cool/Heat temp. Dead Zone setting
y Energy saving – cost efficient, environmental friendly
thermostat
y Offset - ±6°C
y Lock buttons – option
y Set point limits – 10°…30°C
y Remote control– optional (RT03)
COOL
HEAT
ECONOMY
AUTO
CHANGE-OVER
FAULT
INPUT
°C
Wiring diagram Models
Model
FMH-220-FC-Super4
FMH-110-FC-Super4