MSDS

The most significant route of occupational overexposure is inhalation of vapors or spray mist. The symptoms of
overexposure to this product are as follows:
INHALATION: Vapors, mists, sprays, or dusts of this product can cause irritation to the respiratory tract. High
concentrations may cause central nervous system depression, headache, nausea, dizziness, confusion,
unconsciousness, lung damage, coma, and death.
CONTACT WITH SKIN or EYES: Contact can cause eye or skin irritation. Prolonged skin contact can result in
dermatitis. Prolonged eye exposure may include redness, pain, and tearing.
SKIN ABSORPTION: No component of this product is expected to be absorbed through intact skin.
INGESTION: If the product is swallowed, irritation of the mouth, throat, and other tissues of the gastro-intestinal
system can occur. Ingestion of large amounts can cause irritation, pain, vomiting, and diarrhea.
TARGET ORGANS: Acute: Eyes, skin, lungs, central nervous system and gastrointestinal tract. Chronic: Kidneys
and liver.
4. FIRST-AID MEASURES
Victims of chemical exposure must be taken for medical attention if any adverse effects occur. Take a copy of
label and MSDS to physician or health professional with victim.
SKIN EXPOSURE: If this product contaminates the skin, immediately begin decontamination with running water.
Remove exposed or contaminated clothing, taking care not to contaminate eyes. Victim must seek immediate
medical attention if any adverse exposure symptoms develop.
EYE EXPOSURE: If this product enters the eyes, open victim's eyes while under gently running water. Use sufficient
force to open eyelids. Have victim "roll" eyes. Minimum flushing is for 15 minutes. Victim must seek medical
attention.
INHALATION: If vapors, mists, or sprays of this product are inhaled, remove victim to fresh air. Victim must seek
immediate medical attention if any adverse exposure symptoms develop. If necessary, use artificial respiration to
support vital functions.
INGESTION: If this product is swallowed, CALL PHYSICIAN OR POISON CONTROL CENTER FOR MOST CURRENT
INFORMATION. DO NOT INDUCE VOMITING, unless directed by medical personnel. Have victim rinse mouth with
water, if conscious. Never induce vomiting or give a diluent (e.g., water) to someone who is unconscious, having
convulsions, or unable to swallow. If contaminated individual is convulsing, maintain an open airway and obtain
immediate medical attention.
MEDICAL CONDITIONS AGGRAVATED BY EXPOSURE: Persons with pre-existing skin disorders, eye problems,
impaired liver, kidney, respiratory or lymphoid system function can be more susceptible to health effects
associated with overexposures to this product.
5. FIRE-FIGHTING MEASURES
FLASH POINT: Non-Flammable by ASTM D3065, Standard Method for Flammability of Aerosol Products
AUTOIGNITION TEMPERATURE: Not applicable.
FLAMMABLE LIMITS (in air by volume, %):
Lower: Not determined.
Upper: Not determined.
FIRE EXTINGUISHING MATERIALS: Use extinguishing material suitable to the surrounding fire.
Water Spray: NO Carbon Dioxide: OK
Foam: OK Dry Chemical: OK
Halon: OK Other: Any “ABC” Class.
UNUSUAL FIRE AND EXPLOSION HAZARDS: When involved in a fire, this material may decompose and generate
irritating fumes and toxic gases (e.g., Carbon monoxide and Carbon dioxide).
Explosion Sensitivity to Mechanical Impact: Not sensitive under normal conditions.
Explosion Sensitivity to Static Discharge: Not sensitive under normal conditions.
SPECIAL FIRE-FIGHTING PROCEDURES: Incipient fire responders should wear eye protection. Structural firefighters
must wear Self-Contained Breathing Apparatus and full protective equipment. Move containers from fire area if