Owner`s manual

• Press the SELECT button: “PROGRAM 4” & “START” (flashing) will

appear on display.

• Press the “+” or “-” buttons and adjust the hours, minutes

and temperature, the same way as in PROGRAM 1

• “SEND” will flash, press ON/SEND button to send the

information to thermostat.

• “PROGRAM” (flashing) and “SA” (Saturday) will appear on

display.

• Set programming for Saturday the same way as

programming MON to FRI.

• “SEND” will flash; press the ON/SEND button to send the

information to thermostat.

• “PROGRAM” (flashing) and “SU” (Sunday) will appear in

display.

• Adjust the programming for Sunday the same way as

programming MON to FRI.

• “SEND” will flash; press the ON/SEND button to send the

information to the thermostat.

• The TIMER will flash; using the “+” or “-”

buttons, Select TIMER ON or OFF.

• If you changed between TIMER ON (programmable) or

OFF (non-programmable), “SEND” will flash.

• Press ON/SEND button to send the information to the

thermostat.

• If you did not change between them, press the SELECT

button to exit programming.