Owner`s manual

• Press the SELECT button - the minutes will
flash.
• Adjust the minutes using the “+” and “-”
buttons.
• Press the SELECT button again – “COOL”
(flashing) & the set temperature for cooling will
appear on display.
• Adjust the set temperature for cooling using the
“+” and “-” buttons.
• Press the SELECT button again – “HEAT”
(flashing) & the set temperature for heating will
appear on display.
• Adjust the set temperature for heating using the
“+” and “-” buttons.
The controller keeps a safety differential of at least 1 degree
between Heating set point and Cool set point (Heat is always less
than Cool).
After selecting the heating set point, you cannot reduce the cooling
set point less than the heating set point.
Continue with the rest of the program
• Press the SELECT button again - “PROGRAM 2” & “START”
(flashing) will appear will appear on display.
• Press the “+” or “-” buttons and adjust the hours, minutes and
temperature, the same way as in PROGRAM 1
• Press the SELECT button again - “PROGRAM 3” & “START”
(flashing) will appear on display.
• Press the “+” or “-” buttons and adjust the hours, minutes and
temperature, the same way as in PROGRAM 1
15