Owner`s manual

The thermostat keeps a minimum differential of at
least 1 degree between Heat set and Cool set (Heat is
always less than Cool).
7.5 Real Time Clock and Day
• Press the SELECT button – “CLOCK SET” will flash.
• Press the “+” or “-” buttons - the hours will flash.
• Adjust the hours using the “+” and “-” buttons.
• Press the SELECT button again – the minutes will
flash.
• Adjust the minutes using the “+” and “-” buttons.
• Press the SELECT button again – the weekday will
flash.
• Adjust the day using the “+” and “-” buttons.
• Press the SELECT button again to exit the program
or Press ON/SEND button to send the information to
the thermostat.
7.6 Programming
Set the Program times and Temperature settings for the week:
• The remote is 5-1-1 programmable: weekdays (Monday to Friday),
Saturday, and Sunday can be programmed differently.
• 4 program events per day: 1 (Morning), 2 (Day), 3 (Evening), 4 (Night)
The program can be set away from the thermostat and can be sent later on.
To send the program to the thermostat, follow the steps below without adjusting
times and temperatures. Only press the ON/SEND button each time the word SEND
flashes on display (point the remote control to the thermostat)
• To enter programming, press and hold the SELECT
button for three seconds -
“PROGRAM” (flashing) and the days Mon-Fri will
appear on display.
13