Owner`s manual

7.4 Temperature Set Point
In Cool Mode:
• Press the “+” or “-” buttons -
“COOL” and set temperature for cooling will flash.
• Using the “+” and “-” buttons, adjust the set
temperature for cooling.
• Press the ON/SEND button to send the information to
the thermostat.
In Heat Mode:
• Press the “+” or “-” buttons -
“HEAT” and set temperature for heating will flash.
• Using the “+” and “-” buttons, adjust the set
temperature for heating.
• Press the ON/SEND button to send the information to
the thermostat.
In Auto Change-over Mode:
• Press the “+” or “-” buttons -
“COOL” and set temperature for cooling will flash.
• Using the “+” and “-” buttons, adjust the set
temperature for cooling.
• Press the SELECT button –
“HEAT” and set temperature for heating will flash.
• Using the “+” and “-” buttons, adjust the set
temperature for heating.
• Press the SELECT button again or Press
ON/SEND button to send the information to the
thermostat.
12