Manualshelf

Specifications

ManualsBrandsSchwinn ManualsFitness ElectronicsMPower Console V2
11121314151617181920
A45
Process Status (Speed Sensor)
A46
Process Status (Power Sensor)
A43 Pairing
A47
Countdown Timer (Power Sensor)
A44
Countdown Timer (Speed Sensor) A48 Pairing Indicator
9. The Process Status indicator(s) on the console display shows “–––” while the Pairing operation continues.
If Pairing is completed satisfactorily, the console display shows PASS.
The circuit board inside the Power Sensor cover has2color LEDs—1green and 1 red. The2LEDs come on during
the Pairing operation. While the operation continues satisfactorily, the green LED is on. When Pairing is completed
satisfactorily, both LEDs turn off. If the Pairing operation is not completed satisfactorily, only the red LED stays on.
If the Pairing operation is not completed satisfactorily, the console display shows FAIL. Push the pairing button on the
console (L1). Then do the Device Pairing procedure again.
10. When the Pairing procedure is completed, push the Backlight button to go back to the Service Menu.
If the Pairing operation was not completed satisfactorily, the console display shows the P– – menu option again. Push the
pairing button on the console (L1). Then do the Device Pairing procedure again.
11. Tapthe STAGEor AVG/END buttonuntil you seethe “– ––” (exit) optionin the ServiceMenu, and pushthe Backlight button.
12. Install the console and sensors on the bike. Refer to the MPower™ installation guides.
Device Pairing for Multiple Bikes
For Schwinn A.C.™ bikes with MPower™ Consoles inagroup setting, make sure to set up Device Pairing for only one bike atatime
to prevent crosstalk between the devices on different bikes.
NOTICE:
When you remove the handlebars (with console) toclean them, makesure that youinstall them again
on the same bike to keep the Device Pairing correct. If you install the handlebars and console on a
different bike, the console does not read data from the correct sensors.
Recommendation: You can put number labels on the bikes and handlebars to make sure that the Device Pairing stays
correct.
12
A45
A48
A47
A46
A44
A43