Service manual

Parts

Brake Rod and Knob Replacement

Tools Required:

Adjustable wrench•

3mm hex key for plastic removal•

Procedure: Replace the Tension Control Knob

Removal:

Remove one side brake cover.1.

Turn brake adjustment knob clockwise until brake is fully engaged with the ﬂywheel.2.

Using an adjustable wrench, unscrew (couter-clockwise) the brake adjustment knob assembly from the frame head tube. 3.

While unscrewing the knob housing from the frame, you will also need to unscrew the brake rod from the brake nut below. The lower portion 4.

of the rod has left hand threads. So while unscrewing the adjustment knob housing from the frame headtube, turn the actual adjustment knob

clockwise until both are un-threaded.

Pull adjustment knob assembly out of frame.5.

Replacement: Reverse steps of Removal