User's Manual
Table Of Contents
- Table of Contents
- List of Tables
- List of Figures
- Figure1.1 Typical SEL3022 and SEL5810 Virtual Serial Software Application 1.2
- Figure1.2 Encrypted Packet Stream 1.4
- Figure1.3 Typical Connections for the SEL3022 1.6
- Figure1.4 Typical Alarm Output Installation 1.8
- Figure2.1 SEL3022 Dimension Drawing 2.2
- Figure2.2 Windows Run Command 2.3
- Figure2.3 Product Unregistered Prompt 2.4
- Figure2.4 Select a Device Type to Create 2.7
- Figure2.5 Specify New Device Location 2.8
- Figure2.6 Opening Device 2.8
- Figure2.7 Identification Screen 2.9
- Figure2.8 Status: Device 2.10
- Figure2.9 Settings: Wireless 2.10
- Figure2.10 Settings: WEP Keys 2.11
- Figure2.11 Settings: User 2.11
- Figure2.12 Settings: Operator 2.12
- Figure2.13 Settings: Security Officer 2.12
- Figure2.14 Confirm Send Prompt 2.13
- Figure2.15 Send Operation Message 2.13
- Figure2.16 Select Items to Print 2.14
- Figure2.17 Print Window 2.14
- Figure3.1 Remotely Located Recloser Control 3.2
- Figure3.2 Job Done Example SEL-5809 Top Level View 3.3
- Figure3.3 Select a Wireless Session for DNP3 Job Done Example 3.4
- Figure3.4 Settings: DCE Port 3.4
- Figure3.5 Status: Virtual Serial Port With Connection Status Red 3.5
- Figure3.6 Communication Parameters Window in acSELerator 3.6
- Figure3.7 Status: Virtual Serial Port With Connection Status Green 3.6
- Figure3.8 Reading Settings Via the SEL3022 3.7
- Figure3.9 Monitoring SEL651R Meter Data Via the SEL3022 3.8
- Figure3.10 Status: Virtual Serial Port Connection Status Red 3.9
- Figure3.11 Specify Device to Export to SEL5810 Virtual Serial Software 3.10
- Figure3.12 Export Encrypted User Configuration File 3.10
- Figure3.13 Store Encrypted File 3.11
- Figure3.14 Password Prompt in SEL5810 Virtual Serial Software 3.12
- Figure3.15 Communication Parameters Window in acSELerator 3.13
- Figure3.16 Reading SER Report Via acSELerator 3.14
- FigureB.1 PC to SEL3022 Connection B.2
- FigureB.2 SEL3022 and SEL-5809 Connection Parameters B.2
- FigureB.3 SEL5809 Settings Software Connection Method B.3
- FigureB.4 SEL-5809 Opening Connection B.3
- FigureB.5 Status: Device Window B.4
- FigureB.6 Confirmation Prompt B.4
- FigureB.7 Send Operation Prompt B.4
- FigureB.8 Configuring Serial Port Settings in the Terminal Software B.5
- FigureB.9 Send File Prompt B.6
- FigureB.10 Sending Confirmation Window B.6
- FigureB.11 Terminal Invalid Firmware Error Message B.7
- FigureB.12 Terminal Valid Firmware Message B.7
- FigureC.1 Two Independent Layers of Cryptographic Security Protect the SEL3022 Wireless Operato...
- FigureC.2 Operation of the HMAC SHA-1 Keyed Hash Authentication Function C.9
- FigureC.3 Operation of the AES Encryption Function C.10
- FigureC.4 SEL3022 Security Application Overview C.11
- FigureC.5 Wireless Interface Session Authentication Dialog C.15
- Preface
- Introduction & Specifications
- Installation
- Job Done Example
- Settings and Commands
- Testing and Troubleshooting
- Firmware and Manual Versions
- Firmware Upgrade Instructions
- Wireless Operator Interface Security
- Introduction
- Wireless Interface Security Overview
- IEEE 802.11 WEP Security
- The SEL Security Application
- Certificates
- Glossary
Date Code 20050615 Instruction Manual SEL-3022 Transceiver
Installation
Setting Up Your PC or PDA With the SEL-5809 and SEL-5810 Software
2.5
Cryptographic Manual—Do Not Copy
Step 5. When SEL receives your e-mail, you will be sent a registration key
file (regkey.xml), which allows you to run the SEL-5809 Settings
Software.
Step 6. Once you receive this key file, save it on your computer.
Step 7. Restart the SEL-5809 Settings Software. Load the key file using the
{Load Key} button of the registration form. The key automatically
removes the lock.
NOTE: The registration form is also available using the Help
> Register menu.
The SEL-5810 Virtual Serial Software does not have a registration key and does not
need to be registered.
PDA Software Installation
This section assumes you have Microsoft ActiveSync installed on your computer. If
you do not, consult your PDA manual or download a free version from Microsoft.
To install the PDA software to the PDA, perform the following:
Step 1. Connect the PDA to the ActiveSync cradle. This should activate the
ActiveSync software.
Step 2. Install Compact Framework to the PDA.
Step 3. Launch the Pocket PC installation package from the SEL-5809
Settings Software or SEL-5810 Virtual Serial Software.
Step 4. To access the SEL-5809 Settings Software or SEL-5810 Virtual
Serial Software, click on the icon in the programs menu of the PDA.
You must register the SEL-5809 Settings Software before you can use it. The product
unregistered prompt message displays when you start the software.
To register the SEL-5809 Settings Software, perform the following steps.
Step 1. At the prompt’s text box enter the SEL-3022 Serial Number, SEL
Purchase Order Number, or Customer Purchase Order Number.
Step 2. Click OK. This generates the registration file (reginfo.xml).
Step 3. Save the registration file (reginfo.xml) onto your PDA in a location
you can remember.
Step 4. Email the file to 5809@selinc.com or contact your customer service
representative.
Step 5. When SEL receives your e-mail, you will be sent a registration key
file (regkey.xml), which allows you to run the SEL-5809 Settings
Software.
Step 6. Once you receive this key file, save it on your PDA.
Preliminary Copy