User's Manual

SEL-3031 Instruction Manual Date Code 20091009
Settings and Commands
Commands
4.22
SER Command
Use SER to view and manage the Sequential Events Recorder report, as shown in
Table 4.17.
If the requested SER report rows do not exist, the device will respond with the
following:
NO SER data
SET Command
The SET command is for viewing or changing device settings, as shown in Table 4.18.
Append TERSE to skip the settings display after the last setting. Use this parameter to
speed up the SET command. If you want to review the settings before saving, do not
use the TERSE option.
Append the specific setting name you want to change in the SET command to
immediately jump to the setting. If s is not entered, the device starts at the first setting.
For example, to directly jump to the TXPWR setting in the Radio setting category,
enter SET R TXPWR <Enter>. This will take you directly to the TXPWR setting.
Ta b le 4.1 7 S E R Co m ma n d
Command Description Access Level
SER Displays a chronological progression of all avail-
able SER rows (up to 1024 rows); row 1 is the
most recent and row 1024 is the oldest.
1
SER row 1
SER row 1 row 2
SER date 1
SER date 1 date 2
Displays a chronological or reverse chronological
subset of the SER rows.
1
SER C Clears/resets all SER records. 2
Table 4.18 SET Command (Change Settings)
Command Description Access Level
SET G s
a
a. s = specific setting name.
Set Global settings 2
SET R s Set Radio settings 2
SET P s Set serial Port settings 2