User's Manual

Date Code 20091009 SEL-3031 Instruction Manual
Settings and Commands
Settings
4.11
channel availability of the link. The “Zone Availability” gives the availability of each
of the 10 zones. See Monitoring Radio Performance on page 5.1 for more information
on optimizing the radio link.
Figure 4.9 Radio Strength and Channel Availability
The SER window displays the same information as the ASCII SER commands. The
Control Window allows you to clear the SER, synchronize with IRIG, and set the time
and date.
Global Settings
Under the Global group settings category, set the device and host identifiers settings.
The SEL-3031 displays the Device and Host Identifier strings at the top of the serial
port commands responses, identifying messages from individual devices. Enter up to
30 characters, including capital letters A–Z, numbers 0–9, periods, and dashes.
Table 4.3 shows the device and host identifier settings.
Ta b le 4. 3 G l oba l Setti n gs
Setting Prompt Setting Range Setting Name := Factory Default
Device Identifier 30 characters DID
Host Identifier 12 characters (no spaces) HID
Date Format MDY, YMD, DMY DATE_F := MDY
Port Power ON, OFF 5V_EN := OFF