User's Manual

SEL-3031 Instruction Manual Date Code 20091009
Settings and Commands
Settings
4.6
Step 3. Type the filename and click Open.
a. Highlight the device or setting in the A database.
b. Select Copy or Move, and click the > button to create a new
device or setting in the B database.
Step 4. Reverse this process to take devices from the B database to the A
database. Copy creates an identical device that appears in both
databases. Move removes the device from one database and places
the device in another database.
Create a New Database/Copy an Existing Database
To create a new database, perform the following:
Step 1. Open File > Database Manager and click Create New Database.
ACSELERATOR QuickSet will prompt you for a file name.
Step 2. Type the new database name (and location if it differs from the
previous database location), and click Save. ACSELERATOR QuickSet
displays the message
Settings [path and file name] was
successfully created
.
Step 3. Click OK.
To copy an existing database of devices to a new database, perform the following:
Step 1. Open File > Database Manager and click Copy/Move Settings
Between Databases in the Database Manager dialog box.
ACSELERATOR QuickSet will open the last active database and assign
it as Database A.
Step 2. Click Open B.
ACSELERATOR QuickSet will prompt you for a file
location. Type the new database name, click Open, and click Ye s.
The program will then create an empty database. Load devices into
the new database as shown in Copy/Move Settings Between
Databases.
Settings
ACSELERATOR QuickSet allows you to create settings for one or more SEL-3031
devices. Store existing device settings downloaded from the SEL-3031 by creating a
library of settings, then modify and upload these settings from the library to an
SEL-3031.
ACSELERATOR QuickSet makes setting the device easy and efficient and
provides rules-based settings checks, commissioning, and help.
Settings Editor
The Settings Editor shows device settings in easy-to-understand categories. and makes
setting the device simple and efficient. Settings are grouped logically, and settings that
are not used in the selected group are dimmed (grayed) in the
ACSELERATOR QuickSet