User's Manual

SEL-3031 Instruction Manual Date Code 20091009
Settings and Commands
PC Software
4.4
Figure 4.3 Terminal Window Menu
The terminal window is an ASCII interface for the device that supports a basic terminal
emulation. Open the terminal window by clicking Communications > Terminal or by
typing <Ctrl+T>. Verify proper communications with the device by opening a
terminal window, pressing <Enter> a few times, and verifying that a prompt is
received. If a prompt is not received, verify proper setup.
Drivers and Part Number
After clicking Communications > Terminal, access the device at Access Level 1.
Issue the ID command to receive an identification report, as shown in Figure 4.4.
=>>ID <Enter>
"FID=SEL-3031-R100-V0-Z001001-D20091009","08DC"
"BFID=SLBT-3031-R100-V0-Z001000-D20091009","0965"
"CID=25DC8978","034B"
"DEVID=STATION_A","04DB"
"DEVCODE=72","0310"
"PARTNO=30310W01XXX","0538"
"CONFIG=00000000","03E3"
"SPECIAL=0”,”02DE”
=>>
Figure 4.4 Device Response to ID Command
Locate and record the Z-number (Z001001) in the FID string. The first portion of the
Z-number (Z001...) determines the
ACSELERATOR QuickSet device settings driver
version when you are creating or editing device settings files. The Device Editor driver
will be discussed in more detail in Device Editor (Editor Mode). Compare the part
number (
PARTNO = 3031XXXXXXX) with the Model Option Table (MOT) to ensure
correct device configuration.