Installation and Operation Guide

Page 6
3. Description
Rangehood Contents
1. Power to external motor system
2. Male Plug (Main Power 240V)
3. Single 200mm Outlet
4. Reducer – only for Hiow & Isodrive 650 motors
5. Filter
6. Light
Note: Filter and light quantity may vary from
model to model.
1
2
3
4
5
6
(60cm – 572mm approx.) (90cm – 872mm approx.)
267mm approx.
Note: Please make sure that all plastic protection on the rangehood and lters are removed before use.
Note: Dimensions may be subject to change.
Operation
This undermount is equipped with an ON/OFF switch. When the “ON” position is selected the unit
will run at maximum. When the “OFF” position is selected the rangehood will turn o.
Fan
1 2 3
“I” is the ON position and “O” is the OFF position.
Light
1 2 3
“I” is the ON position and “O” is the OFF position.
Cutout Size
Please use this as a guide only when designing your cabinet. Alternatively, present the rangehood
to your cabinet maker so that they may take their own measurements and check that the rangehood
ts in the cabinet correctly.