Installation and Operation Guide
Page 5
2. Maintenance & Service
Incandescent Bulb Replacement
• Switch o the power to the canopy hood and allow the bulb to cool.
• Remove the bulb by turning it by hand in an anti clockwise direction
• Care must be taken to avoid the bulb falling onto the hob top
• Replace the bulb by inserting it into the socket and hand turning
in a clockwise direction
Electrical Cord
Ensure the supply cord is not exposed to heat, chemicals or sharp objects. If the supply cord is damaged,
it must be replaced by the manufacturer, service agent or a similarly qualied person in order to avoid
a hazard.
For Users
• This product is designed for household use and should not be used outside or for commercial
applications. After use, always ensure that all controls are in the “OFF” position. When frying with
a gas ame, take particular care not to allow the oil or grease in the pan to catch re. (Flambé)
• Do not leave the frying pan or fryer unattended, as the oil could overheat and catch re.
• Never ambé any foods beneath the rangehood. The ames could cause a re.
• Before carrying out any operation inside the rangehood, unplug the appliance from the electrical
mains.
• Respect the cleaning frequencies and intervals for changing the lters, as otherwise the accumulated
grease could cause a re or damage the product.
• Changes made to the steel surface will render the warranty invalid.
49
9
28
0
22
3
46
2
14
6
50
27
28
3
20
41
Max425
Min305
60
0
78.5
174
B
A
D
C
Ø4
A,B,C,D =
520
500
19
10
10
2
10
462±2
305
283
223±2
248
50
Ø
1
3
0
±
2
28
80
B
C
D
A
A
B
C
D
1
2
1
2 3
4
5
5