Installation and Operation Guide
Page 10
4. Installation
Overview
1
2
3
4
5
6
7
8
9
1. XDrive-600 Motor
2. Roof Seal Kit (Dektite)*
3. Support Straps*
4. Attach Flexi Duct to Bell-
Mouth Adaptor using duct
tape and cable tie. DO NOT
rip the ducting.
5. Motor Power Lead (Male Plug)
6. Rangehood to Motor Lead
(Female Plug)
7. Main Power Lead (Male Plug)
8. Flexi Ducting must be pulled
taut. DO NOT crush or kink
the ducting. Keep ducting
secured in place.
9. Connect exi ducting to the
outlet on rangehood using
duct tape or cable tie. Please
DO NOT rip the ducting.
* NOTE: The motor system does not include a roof seal kit, support straps, duct tape and cable ties.
There is a separate Motor Installation Guide in the Motor Box.
Flexi Ducting
IMPORTANT: For the motor to operate eciently, do not crush or kink the exi ducting, as it will reduce air
ow and may cause noise to occur through the system. Ducting needs to be kept taut at all times.
NOTE: For more information, please refer
to motor installation guide.