User's Manual

Page 15
Figure 11 Roof mount option
Twin 200mm Outlet Installation Example
This is for use where one motor is to be used and there are two 200mm outlets, refer gure 11.
Try to keep length of
exible ducting as even
as possible other wise
motors will draw air o
each other
Ensure exible ducting
is fully extended and as
short as possible. Use
smooth owing curves for
maximum air ow. Remove
excess ducting by trimming
to length.
200 x 200 x 200mm
If multi-t Y joint supplied you
will need to cut to size.
900 motor
4. Installation