User's Manual
Page 19
8. Flexible Duct
Flexible Duct
Flexible ducting must be fully extended and cut to the required length upon installation, refer to gure 13.
Maximum fan performance will not be achieved unless the ducting is fully extended. Failure to fully extend
ducting results in a smaller air passage and lower airows. Incorrect installation may reduce airow or increase
noise levels. Call outs relating to incorrect installation will result in a service fee directed to the customer.
Schweigen will take no responsibility for problems caused by faulty installation. Installation should be done by a
qualied technician. A preferred installer list can be obtained from Schweigen website www.schweigen.com.au.
Please keep the exible duct taut,
3 metres in length (optional)
NOTE: In shallow roof spaces
extend exible duct horizontally
Figure 13