Installation Guide

Page 8
4. Installation
1600 motor
Figure 1 Roof Mount Option
IMPORANT
For more exible ducting instructions, refer page 22. Shutter assembly for 1600 motor is not
shown in the diagram. Weather shield (for 1600 motor only) should be installed to prevent
rain/water entering the unit.
Pipe protrusion above dektite
Fix fan module using side
locking screw
Weather shield attachment
(only for 1600 motor)
Connect to
rangehood
Connect to power supply
NOTE: Prevent any cord bunching
by pulling cord through from plug
top end
NOTE: Minimum ducting
length 4 metres. Fully extend
exible ducting, cut to length.
Fit side supports to locate pipe
Strap to supports
Power Cord
Dektite
150mm PVC Pipe
(Locking holes fan end)
Bell-mouth Adaptor
50mm