Installation Guide
Page 15
IMPORANT
For more exible ducting instructions, refer page 22. Shutter assembly for 1600 motor is not
shown in the diagram.
Twin Motor Installation (suitable for the CL Range)
Where two motors are to be used, follow the method below. Each motor should have a separate ue
pipe. Refer gure 9. The two motors can be wired by an electrician.
Connect to main power
Connect to motor
Computer
box
Connect to 150mm
ducting adaptor
Rangehood
Cover
Use smooth owing curves for
maximum airow. Remove excess
ducting by trimming to length.
Note: Do not install exi ducting in
a straight line
Must have separate
ue pipe for twin
fan installation
Z: Minimum distance between
the two fans is 600mm.
Connect to rangehood
Z
Figure 9 Roof mount option
1600 motor
4. Installation