Installation Guide

Page 13

4. Installation

Installation Through Wall for Isodrive 1600

Due to the weight and to create stability for the Isodrive 1600 motor, it is require to use a hanging

bracket. Warranty will be void if a hanging bracket is not used.

Figure 7

*Optional parts are available from Schweigen, please contact 1300 829 066.

Shield

Hanging Plate

Power Cord

Hanging

Plate

Hanging Bracket P1107*

NOTE: Hanging bracket is required

Shutter Assembly

Optional wall cover plate with

notch at bottom P1108*

Minimum pipe protrusion

from wall surface

Height of hanging bracket

above top of pipe

Slot in pipe at bottom

(6 O’Clock)

Optional wall cover plate P1108*

Required Hanging

Bracket P1107*

Shield

47mm

90-95mm

Wall

Ensure that power

cable passes through

the cover plate

notched recess and

is clear of cut edges

Hanging bracket may

be substituted in the

eld by 25mm x 6mm

at bar bent to form

angle bracket