Installation Guide - 2

Page 7
3. Description
Isodrive Motor
Included in the box:
1. Isodrive 3200 motor (450W x 290H mm approx.)
Approx. 3 metre, 10amp cable and standard male plug
2. Fire resistant 250mm OD
1
PVC riser pipe
Note: Cable cut-out at the both ends
3. Flexible ducting (250mm)
Approx. 4 metres, 250mm (260mm OD
1
) diameter
4. Flexible ducting (200mm)
Approx. 1.5 metres, 200mm (210mm OD
1
) diameter
5. 250-200mm reducer
Included with the 3200 Kit
(for rangehoods with twin outlets only)
1. Flexible ducting (200mm)
Approx. 1.5 metres, 200mm (210mm OD
1
) diameter
2. Y joint (250 X 200 X 200mm)
Not included in the box:
• Roof seal kit / Dektite
• Support straps for poly pipe which connects to the
roof truss
• Aluminium Foil tape
• Zip ties
• Wall Mounting Kit
1
OD refers to outside dimension.
1
2
3
2
4
1
50mm
Dektite
Fix pipe to fan module
with side locking screws
Fit side supports to locate
pipe
250mm flexible duct
(Minimum 4 metres
ducting length fully
extended)
Power Cord
250mm PVC Pipe
Strap to supports
Note : Prevent any
cord bunching by
pulling cord
through from plug
top end
Connect to power supply
Pipe protrusion above
dektite
5