Installation and Operation Guide

Page 18
6. Installation
Isodrive
®
Motor Setup
Note
Please refer to the Isodrive
®
motor installation guide for more details
on exi ducting and Isodrive
®
motor installation.
Important
Please remove the clip when attaching Isodrive
®
1600 / 3200 motor (Single or Twin)
system. To remove the clip, hold down 1, 2 and 3 gently pull out to direction 4.
NOTE: DO NOT REMOVE the clip at the end of the white cord when installing
an Isodrive
®
650 / 900 motor (Single or Twin) system.
For technical support, please contact 1300 829 066.