Installation Guide

Page 10

BBQ Installation

When installing the rangehood over a BBQ , please be aware that the lid will obstruct the rangehoods

eectiveness to extract smoke, steam and odours. Where possible, remove the lid of the BBQ unit when in use, so

as to allow for eective rangehood extraction. Alternatively, install the rangehood on an extension wall, refer

to the gure below.

Step 4

The outer and inner metal ue are encased one within the

other.

Attach the ue wall mounting bracket to the correct position on

the wall for the inner ue section to attach to at your desired

height.

Slide the inner ue cover (1), to the wall mounting bracket (2),

and attach.

NOTE: Please make sure that all plastic protection on the

rangehood and lters are removed before use.

Extension

Wall

4. Installation