Owner`s manual

GP-MSJW-CX-07B

STW-JZ / IW Manual

RD: Sept, 2005

RL: 7B

FIGURE 13 MOUNTING FOCUS SHIELD REFLECTOR TO PLATE HANGER

Page 13

10. FOCUS SHIELD REFLECTOR INSTALLATION

The focus shield reflector system can be adjusted to either side up to 45° from horizontal. SEE FIG-

URE 15 (PAGE 13), FIGURE 7(PAGE 9) Note that for both horizontal and angle mounting, the tube

must be level along its length. Improper mounting can result in overheating of controls and combus-

tible materials. Use only non-combustible mounting hardware.

1 Webbed Hanger Flange under Reflector

2 Screws to secure Reflector to Plate Hanger.

3 Chain Hole for horizontal suspension

4 Chain Hole for 45° suspension

NOTE: For suspension between 1° and 44°, use both

suspension points 3 and 4 (see details Fig.15 on

Page 13).

5 Opening for Tube

6 Reflector

7 The following Reflector will mount over

and onto

this side of the Webbed Hanger.