Technical data

infraSchwank D / calorSchwank D - shape U

Version 004 infra_calor D shape U Australia 43/13 Technical specification subject to change

Indirect flue into the room with flue gas diverter

Installation with indirect flue into

the room must be mounted with

flue gas diverter to avoid flow

back of flue gas in combustion air

stream.

Note that the flue gas diverter

(code no. 126 7018 0) is mounted

in a position so that the flue gas

is diverted from the burner.

To prevent CO

impingement on

wall when configured as an

indoor flue less appliance a

clearance of 1200mm from the

flue outlet is required.

Fig 7: Flue less appliance with flue gas diverter

flue gas diverter with right

mountin

position