Owner`s manual

SP-MECM-BX-05A
ecoSchwank - Millivolt Manual
RD: MAY, 2004
RL: 5
KH
6. LIGHTING INSTRUCTIONS
7. THERMOSTAT CONTROL
1. Turn heater thermostat to lowest setting. Turn
gas control knob to “OFF” position for five min
utes before lighting.
2. Open Pilot access door to locate pilot and turn
gas control knob to “PILOT”
position.
3. Depress gas control knob and light pilot. Con
tinue to hold knob for one minute after pilot is
lit.
4. Turn gas valve to “ON” position.
5. Turn Heater thermostat to desired temperature.
B. If heater does not light, shut down heater.
C. To shut down heater:
1. Turn heater thermostat to lowest setting.
2. Depress gas control knob and turn to
“OFF” position.
Manufactured under the following U.S. Patents:
3,825.403 Patented in Canada:
other Patents Pending.
WALL THERMOSTAT
50’ MAXIMUM
Page 6