Instruction Manual

GP-M45J-CX-03D

4N/L51-J,4N/L62-J Manual

RD: Aug 2006

RL: 3D

4. MAIN COMPONENTS AND TOOLS REQUIRED FOR ASSEMBLY

Tools Needed: (not supplied)

Adjustable Wrench, Slip Joint Pliers, Phillips Screwdriver-Medium Blade (#2 or #3 blade), Hammer, 3/8” Masonry

Drill Bit (if mounting on concrete patio), Teflon Plumbing Tape for Joints, Spray Bottle of Soapy Water or Paint Brush and

soapy water (to check leaks)

Parts Supplied:

Models 4N/L51, 44N/L5 include stainless post and base.

Models 4N/L62, 44N/L6 include black powder coated post

and base.

All other components are common for Models

4N/L51, 44N/L5 & 4N/L62, 44N/L6 .

Page 4

• Main Burner / Head Assembly Unit

• 66” Flexible Gas Hose with brass fittings.

• 32” Aluminum Reflector (5 Piece).

• 2 3/8” x 61” Pole.

• 2 3/8” x 5 1/2” (c/w 8” Flange) Floor Mount Adapter.

• 2 3/8” x 12 3/4” Concrete Embedded Adapter.

• 13” Diameter Domed Base Cover.

• 4 - 3/8” Concrete Lag Bolts.

• 4 -Phillips 10 mm Screws for Burner to post

• 6 -Phillips 10 mm Screws for Post to Floor Adapter.

• 3 - M8-125 Wing Nuts for Top Reflector.

• 6 -Washers for Top Reflector.

• 12 x 1/4” Acorn Nuts for Top Reflector Assembly.

• 12 x 1/4” Washers for Top Reflector Assembly.

• 1” x 7” Ribbed UV Protector for Hose

• AAA Igniter battery.

Note: Gas Pressure Regulators are required (not supplied )

(see Connection and Testing)