Instructions

32
IMPORTANT SAFETY INFORMATION!
Safety and installation information
All of our products at the time of purchase conform to the currently applicable safety regula-
tions and are, when used as intended, completely safe! Please heed the following information
to avoid any potential dangers, damage or faults:
Set-up information
The heat generated when the unit is in operation must be dissipated by adequate air circula-
tion, so the unit must not be covered up or situated in a closed cupboard. To avoid both the
equipment damage and possible subsequent damage, only designated equipments should be
installed on a flat surface for wall mounting.Make sure that the ventilation slots and the cooling
unit on the device are not covered, e.g with newspapers, table cloths or curtains. This could
possibly lead the device to fire.
As the unit generates heat, this can lead to discolouration on the surface of furniture. Make
sure there is at least 10 cm of clearance around the unit. Radiators or other heat sources in the
vicinity of the unit can lead to malfunctions or damage the unit. You must not place any open
fire sources, such as burning candles, on top of the unit.
The unit must not be located in rooms with a high level of humidity e.g. kitchens, bathrooms
etc, as condensation or splashing water may damage the unit. The unit is designed for use in
dry, temperate environments. If the unit is moved from a cold to a warm place, condensation
may form inside the unit. Do not expose the unit to direct sunlight. Do not place any containers
holding liquids, e.g. vases of flowers on top of the unit. These might fall over and the liquid
may cause serious damage or lead to a risk of electric shock. The unit must not be set up in
the vicinity of appliances that generate strong magnetic fields (e.g. motors, loudspeakers,
transformers).
Information on the mains connection
For units that are supplied with a mains adaptor, only use the original mains adaptor supplied
with the unit! The mains adaptor/mains plug must only be connected to a ~100-240V, 50/60Hz
mains supply The mains adaptor/mains plug must be easily accessible at all times so that the
unit can be unplugged from the mains outlet. Only connect the mains adaptor/mains plug to a
correctly installed power outlet! Avoid using multiple sockets!
The mains adaptor/mains plug must only be plugged in once installation has been completed
according to the instructions. The unit must not be used if the mains adaptor/mains plug is
faulty or the unit is damaged in any other way.
Should any liquids or foreign matter accidentally get into the unit, unplug the mains adaptor/
mains plug from the power outlet immediately. Have the unit inspected by a qualified engineer
before using it again.
Under no circumstances should you open the unit or the mains adaptor ñ this must only by
carried out by a qualified engineer.
Do not let unsupervised children tamper with the unit. Do not let foreign objects, e.g. needles,
coins etc fall into the interior of the unit.
Installation must be carried out by competent persons.
Before setting up and first using the unit, please read and follow the
safety instructions carefully.