Information

4
Important safety information!
Installation must be carried out by competent persons. Before setting up and fi rst using the unit, please read and
follow the safety instructions carefully.
Safety and installation information
All of our products at the time of purchase conform to the currently applicable safety regulations and are, when
used as intended, completely safe! Please heed the following information to avoid any potential dangers, damage
or faults:
Set-up information
The heat generated when the unit is in operation must be dissipated by adequate air circulation, so the unit must
not be covered up or situated in a closed cupboard. To avoid both the equipment damage and possible subsequent
damage, only designated equipments should be installed on a fl at surface for wall mounting.
Make sure that the ventilation slots and the cooling unit on the device are not covered, e.g with newspapers, table
cloths or curtains. This could possibly lead the device to fi re.
As the unit generates heat, this can lead to discolouration on the surface of furniture. If necessary, place the unit
on a suitable base.
Make sure there is at least 10 cm of clearance around the unit. Radiators or other heat sources in the vicinity of
the unit can lead to malfunctions or damage the unit. You must not place any open fi re sources, such as burning
candles, on top of the unit.
The unit must not be located in rooms with a high level of humidity e.g. kitchens, bathrooms etc, as condensation
or splashing water may damage the unit. The unit is designed for use in dry, temperate environments. If the unit is
moved from a cold to a warm place, condensation may form inside the unit. Do not expose the unit to direct sunlight.
Therefore leave the unit switched off for a few hours.
Do not place any containers holding liquids, e.g. vases of fl owers on top of the unit. These might fall over and the
liquid may cause serious damage or lead to a risk of electric shock.
The unit must not be set up in the vicinity of appliances that generate strong magnetic fi elds (e.g. motors, loud-
speakers, transformers).
Information on the mains connection
For units that are supplied with a mains adaptor, only use the original mains adaptor supplied with the unit! The
mains adaptor/mains plug must only be connected to a 230 V
~
/50 Hz mains supply The mains adaptor/mains plug
must be easily accessible at all times so that the unit can be unplugged from the mains outlet. Supplied cable must
not be damaged or bruised by any objects Only connect the mains adaptor/mains plug to a correctly installed power
outlet! Avoid using multiple sockets!
The mains adaptor/mains plug must only be plugged in once installation has been completed according to the
instructions. The unit must not be used if the mains adaptor/mains plug is faulty or the unit is damaged in any
other way.