Datasheet

3
3-Phase AC Filters / DC Filters
FMAD RAIL
https://www.schurter.com /PG80
EMC Products
Diagrams
1)
2)
1) Line
2) Load
Attenuation Loss
. . . . . 0.1/100Ω differential mode ........... 100/0.1Ω differential mode - - - - 50Ω differential mode _____ 50Ω common mode
Industrial version
3 A 6 A 10 A 20 A
All Variants
Rated Current [A] Tripped
Power Dissi
-
Leakage Cur-
rent [mA] @ 440V,
Contact Resistance
[mΩ]
Weight
[g]
Screw clamps
[mm2] 2)
Order Number
10 3.2 0.02 8 395 g 4 FMAD-MRYB-1010
█
20 5.8 0.08 3.6 420 g 4 FMAD-MRYB-2010
█
3 1.4 0.02 38 385 g 4 FMAD-MRYB-0310
6 1.7 0.02 11.5 385 g 4 FMAD-MRYB-0610
█ Most Popular.
Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER
1) Nominal leakage current acc. to IEC60950 - 5.2.5. under normal operating conditions. Note: worst case leakage current
acc. to IEC60950 - Annex G4 (situation with two interrupted lines) can be much higher.
2) Maximum conductor cross section (wire gauge) to be used; a comparative table for AWG and mm² values can be found in
the general product information www.schurter.com/emc_info
Packaging unit
5 Pcs
The specifications, descriptions and illustrations indicated in this document are based on current
information. All content is subject to modifications and amendments. Information furnished is believed
to be accurate and reliable. However, users should independently evaluate the suitability and test each
product selected for their own applications.
15.06.2018