User manual
Table Of Contents
- CONTENTS
- SAFETY INFORMATION
- SAFETY INSTRUCTIONS
- PRODUCT DESCRIPTION
- CONTROL PANEL
- PROGRAMMES
- SETTINGS
- OPTIONS
- BEFORE FIRST USE
- DAILY USE
- HINTS AND TIPS
- CARE AND CLEANING
- TROUBLESHOOTING
- Technical problems
- Poor washing results
- Poor drying results
- Traces of rust on cutlery
- Limescale deposits on the tableware, on the tub and on the inside of the door
- Visible bluish film on glasses and cutlery, on the tub and on the inside of the door
- Chipped tableware
- Excess of moisture on the baskets and inside the appliance
- Odours inside the appliance
- The lid of the detergent dispenser does not close properly
- There are residues of detergent in the dispenser at the end of the programme
- Unusual foam during washing
- Items that are dull, discoloured or with a non washable patina
- TECHNICAL INFORMATION
- INHALTSVERZEICHNIS
- SICHERHEITSINFORMATIONEN
- SICHERHEITSANWEISUNGEN
- GERÄTEBESCHREIBUNG
- BEDIENFELD
- PROGRAMME
- EINSTELLUNGEN
- OPTIONEN
- VOR DER ERSTEN INBETRIEBNAHME
- TÄGLICHER GEBRAUCH
- TIPPS UND HINWEISE
- REINIGUNG UND PFLEGE
- FEHLERSUCHE
- Technische Störungen
- Nicht zufriedenstellende Spülergebnisse
- Nicht zufriedenstellende Trocknungsergebnisse
- Rostspuren am Besteck
- Kalkablagerungen auf dem Geschirr, im Innenraum und auf der Türinnenseite
- Sichtbarer blauer Belag auf Gläsern und Besteck, im Innenraum und an der Türinnenseite
- Angeschlagenes Geschirr
- Extreme Feuchtigkeit in den Körben und im Geräteinneren
- Gerüche im Gerät
- Der Deckel des Reinigungsmittelbehälters ist nicht richtig geschlossen.
- Am Ende des Programms befinden sich Reinigungsmittelreste im Behälter.
- Ungewöhnliche Schaumbildung während des Spülgangs
- Geschirr wird blind, verfärbt sich oder Beläge sind nicht abwischbar.
- TECHNISCHE DATEN
Water hardness
German de-
grees (°dH)
French de-
grees (°fH)
mmol/l Clarke de-
grees
Water softener
level
47 - 50 84 - 90 8.4 - 9.0 58 - 63 10
43 - 46 76 - 83 7.6 - 8.3 53 - 57 9
37 - 42 65 - 75 6.5 - 7.5 46 - 52 8
29 - 36 51 - 64 5.1 - 6.4 36 - 45 7
23 - 28 40 - 50 4.0 - 5.0 28 - 35 6
19 - 22 33 - 39 3.3 - 3.9 23 - 27
5
1)
15 - 18 26 - 32 2.6 - 3.2 18 - 22 4
11 - 14 19 - 25 1.9 - 2.5 13 - 17 3
4 - 10 7 - 18 0.7 - 1.8 5 - 12 2
<4 <7 <0.7 < 5
1
2)
1)
Factory setting.
2)
Do not use salt at this level.
How to set the water softener
level
The appliance must be in programme
selection mode.
1. To enter the user mode, press and hold
simultaneously
and until
the indicators , and start
to flash and the display is blank.
2. Press .
• The indicators
and go
off.
• The indicator continues to flash.
• The display shows the current
setting: e.g. = level 5.
3. Press again and again to
change the setting.
4.
Press the on/off button to confirm the
setting.
Use of rinse aid and multi-
tablets together
When you activate the option Multitab, the
rinse aid dispenser no longer releases rinse
aid. However if you are using multi-tablets
and the drying results are not satisfactory,
we suggest to use multi-tablets and rinse
aid together. In this case you have to
activate the rinse aid dispenser.
The rinse aid dispenser will remain activated
until you modify the setting again
How to activate the rinse aid
dispenser
The appliance must be in programme
selection mode.
1.
To enter the user mode, press and hold
simultaneously and until
the indicators
, and start
to flash and the display is blank.
2. Press .
• The indicators
and go off.
• The indicator continues to
flash.
9