User manual
Table Of Contents
- CONTENTS
- SAFETY INFORMATION
- SAFETY INSTRUCTIONS
- PRODUCT DESCRIPTION
- CONTROL PANEL
- PROGRAMMES
- SETTINGS
- OPTIONS
- BEFORE FIRST USE
- DAILY USE
- HINTS AND TIPS
- CARE AND CLEANING
- TROUBLESHOOTING
- Technical problems
- Poor washing results
- Poor drying results
- Traces of rust on cutlery
- Limescale deposits on the tableware, on the tub and on the inside of the door
- Visible bluish film on glasses and cutlery, on the tub and on the inside of the door
- Chipped tableware
- Excess of moisture on the baskets and inside the appliance
- Odours inside the appliance
- The lid of the detergent dispenser does not close properly
- There are residues of detergent in the dispenser at the end of the programme
- Unusual foam during washing
- Items that are dull, discoloured or with a non washable patina
- TECHNICAL INFORMATION
- INHALTSVERZEICHNIS
- SICHERHEITSINFORMATIONEN
- SICHERHEITSANWEISUNGEN
- GERÄTEBESCHREIBUNG
- BEDIENFELD
- PROGRAMME
- EINSTELLUNGEN
- OPTIONEN
- VOR DER ERSTEN INBETRIEBNAHME
- TÄGLICHER GEBRAUCH
- TIPPS UND HINWEISE
- REINIGUNG UND PFLEGE
- FEHLERSUCHE
- Technische Störungen
- Nicht zufriedenstellende Spülergebnisse
- Nicht zufriedenstellende Trocknungsergebnisse
- Rostspuren am Besteck
- Kalkablagerungen auf dem Geschirr, im Innenraum und auf der Türinnenseite
- Sichtbarer blauer Belag auf Gläsern und Besteck, im Innenraum und an der Türinnenseite
- Angeschlagenes Geschirr
- Extreme Feuchtigkeit in den Körben und im Geräteinneren
- Gerüche im Gerät
- Der Deckel des Reinigungsmittelbehälters ist nicht richtig geschlossen.
- Am Ende des Programms befinden sich Reinigungsmittelreste im Behälter.
- Ungewöhnliche Schaumbildung während des Spülgangs
- Geschirr wird blind, verfärbt sich oder Beläge sind nicht abwischbar.
- TECHNISCHE DATEN

Cleaning the filters
A B C
C
1.
Turn the filter (A) counterclockwise and
remove it.
2.
Disassemble the filter (A).
3. Remove the filter (B).
4. Wash the filters with water.
5. Before you put the filter (B) back, make
sue that there are no residues of food or
soil in or around the edge of the sump.
(C).
Make sure that the filter (B) is correctly
positioned under the 2 guides (C).
6. Assemble the filter (A) and put it into
position in filter (B). Turn it clockwise
until it locks.
CAUTION! An incorrect position
of the filters can cause bad
washing results and damage to
the appliance.
Cleaning the upper spray arm
We recommend to clean regularly the upper
spray arm to avoid soil to clog the holes.
Clogged holes can cause unsatisfactory
washing results.
1. Pull out the upper basket.
2.
To disengage the spray arm from the
basket, press the spray arm upwards in
the direction indicated by the lower
arrow and simultaneously turn it
clockwise.
3. Wash the spray arm under running
water. Use a thin pointed tool, e.g.
toothpick, to remove particles of soil
from the holes.
15










