User manual
Table Of Contents
- CONTENTS
- SAFETY INFORMATION
- SAFETY INSTRUCTIONS
- PRODUCT DESCRIPTION
- CONTROL PANEL
- PROGRAMMES
- SETTINGS
- OPTIONS
- BEFORE FIRST USE
- DAILY USE
- HINTS AND TIPS
- CARE AND CLEANING
- TROUBLESHOOTING
- Technical problems
- Poor washing results
- Poor drying results
- Traces of rust on cutlery
- Limescale deposits on the tableware, on the tub and on the inside of the door
- Visible bluish film on glasses and cutlery, on the tub and on the inside of the door
- Chipped tableware
- Excess of moisture on the baskets and inside the appliance
- Odours inside the appliance
- The lid of the detergent dispenser does not close properly
- There are residues of detergent in the dispenser at the end of the programme
- Unusual foam during washing
- Items that are dull, discoloured or with a non washable patina
- TECHNICAL INFORMATION
- INHALTSVERZEICHNIS
- SICHERHEITSINFORMATIONEN
- SICHERHEITSANWEISUNGEN
- GERÄTEBESCHREIBUNG
- BEDIENFELD
- PROGRAMME
- EINSTELLUNGEN
- OPTIONEN
- VOR DER ERSTEN INBETRIEBNAHME
- TÄGLICHER GEBRAUCH
- TIPPS UND HINWEISE
- REINIGUNG UND PFLEGE
- FEHLERSUCHE
- Technische Störungen
- Nicht zufriedenstellende Spülergebnisse
- Nicht zufriedenstellende Trocknungsergebnisse
- Rostspuren am Besteck
- Kalkablagerungen auf dem Geschirr, im Innenraum und auf der Türinnenseite
- Sichtbarer blauer Belag auf Gläsern und Besteck, im Innenraum und an der Türinnenseite
- Angeschlagenes Geschirr
- Extreme Feuchtigkeit in den Körben und im Geräteinneren
- Gerüche im Gerät
- Der Deckel des Reinigungsmittelbehälters ist nicht richtig geschlossen.
- Am Ende des Programms befinden sich Reinigungsmittelreste im Behälter.
- Ungewöhnliche Schaumbildung während des Spülgangs
- Geschirr wird blind, verfärbt sich oder Beläge sind nicht abwischbar.
- TECHNISCHE DATEN
What to do if you want to stop
using multi-tablets
Before you start to use separately
detergent, salt and rinse aid do the
following procedure.
1. Set the highest level of the water
softener.
2. Make sure that the salt and rinse aid
containers are full.
3. Start the shortest programme with a
rinsing phase. Do not add detergent
and do not load the baskets.
4.
When the programme is completed,
adjust the water softener according to
the water hardness in your area.
5.
Adjust the released quantity of rinse aid.
Loading the baskets
• Only use the appliance to wash items
that are dishwasher-safe.
• Do not put in the appliance items made
of wood, horn, aluminium, pewter and
copper.
• Do not put in the appliance items that
can absorb water (sponges, household
cloths).
• Remove remaining food from the items.
• Make soft the remaining burned food on
the items.
• Put hollow items (cups, glasses and
pans) with the opening down.
• Make sure that cutlery and dishes do not
bond together. Mix spoons with other
cutlery.
• Make sure that glasses do not touch
other glasses.
• Put small items in the cutlery basket.
• Put light items in the upper basket.
Make sure that the items do not move.
• Make sure that the spray arm can move
freely before you start a programme.
Before starting a programme
Make sure that:
• The filters are clean and correctly
installed.
• The cap of the salt container is tight.
• The spray arms are not clogged.
• There is dishwasher salt and rinse aid
(unless you use multi- tablets).
• The position of the items in the baskets
is correct.
• The programme is applicable for the
type of load and for the degree of soil.
• The correct quantity of detergent is
used.
Unloading the baskets
1. Let the tableware cool down before you
remove it from the appliance. Hot items
can be easily damaged.
2. First remove items from the lower
basket, then from the upper basket.
At the end of the programme
water can still remain on the
sides and on the door of the
appliance.
CARE AND CLEANING
WARNING! Before
maintenance, deactivate the
appliance and disconnect the
mains plug from the main
socket.
Dirty filters and clogged spay
arms decrease the washing
results. Make a check regularly
and, if necessary, clean them.
14