User manual

OPTIONS
Desired options must be
activated every time before you
start a programme.
It is not possible to activate or
deactivate options while a
programme is running.
The Option button toggles
between the available options
and their possible
combinations.
Not all options are compatible
with each other. If you select
non compatible options, the
appliance automatically
deactivates one or more of
them. Only the indicators of the
still active options are on.
If an option is not applicable to
a programme, the related
indicator is off or it flashes
quickly for a few seconds and
then goes out.
Activating options can affect
the water and energy
consumption as well as the
programme duration.
XtraDry
Activate this option to boost the drying
performance.
XtraDry is a permanent option for all
programmes other than
. It is
automatically activated in next cycles. This
configuration can be changed at any time.
Every time is activated,
XtraDry is off and needs to be
chosen manually.
Activating XtraDry deactivates TimeSaver
and vice versa.
How to activate XtraDry
Press until the indicator is on.
The display shows the updated
programme duration.
TimeSaver
The TimeSaver allows to reduce the
duration of a selected programme by
approximately 50%.
The washing results are the same as with
the normal programme duration. The
drying results can decrease.
This option increases the pressure and
the temperature of the water. The washing
and the drying phases are shorter.
By default, TimeSaver is off, but it is
possible to activate it manually. This
option cannot be combined with XtraDry.
How to activate TimeSaver
Press until the indicator is on.
The display shows the updated
programme duration.
XtraHygiene
This option provides better hygiene results
by keeping the temperature at 70 °C for at
least 10 minutes during the last rinsing
phase.
How to activate XtraHygiene
Press until the indicator is on.
The display shows the updated
programme duration.
BEFORE FIRST USE
1. Make sure that the current level of
the water softener agrees with the
hardness of the water supply. If not,
adjust the level of the water
softener.
2. Fill the salt container.
12