Owner's manual

Setpoints – The customer can change this setting based on their requirement.
Temp Rise: 10.0
0
F
Hist: 01.0
0
F
High Temp Alarm –
The customer can change this setting based on their requirement.
Set: 85.0 0F
Hist: 05.0 0F
Disable / Enable
Rotation
Status: AUTO FOR / REV
Enable: Yes / No
RUN HOURS
Run Hours
Pump 1: 00000000000
Comp 1: 00000000000
Liquid1: 00000000000
Run Hours
Pump 2: 00000000000
Comp 2: 00000000000
Liquid2: 00000000000
Run Hours
Fans: 00000000000
THESE VALUES WILL CHANGE WHEN SYSTEM IS RUNNING
FACTORY SETTINGS: PASSWORD PROTECTED: 0177
Pumps #1 SETTINGS
Minimum On: 000 s
Minimum Off: 000 s
Flow Start Del: 05 s
Pumps #2 SETTINGS
Minimum On: 000 s
Minimum Off: 000 s
Flow Start Del: 05 s
Comp #1 SETTINGS
Minimum On: 010 s
Minimum Off: 060 s
Comp #2 SETTINGS
Minimum On: 010 s
Minimum Off: 060 s
Circuit #1 SETTINGS
Low P Start Del: 30 s
Circuit #2 SETTINGS
Low P Start Del: 30 s
Condenser Fan Config
Minimum On: 010 s