Datasheet

2
04-2015, Rev. 0415
www.te.com
© 2015 Tyco Electronics Corporation,
a TE Connectivity Ltd. company.
Catalog and product specification according
to IEC 61810-1 and to be used only together
with the ‘Definitions’ section.
Catalog and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Catalog product data, ‘Definitions’ section,
application notes and all specifications are
subject to change.
SCHRACK
General Purpose
Panel/Plug-in Relays
Power Relay RM C/D
(Continued)
Coil Data (continued)
Coil versions, AC coil
Coil code Rated Operate Release Coil Rated coil
STD LED voltage voltage voltage resistance power
50/60Hz 50/60Hz 50/60Hz
VAC VAC VAC Ω±10%
1)2)
VA
Coil versions, AC-coil, RMC, RMD
524 R24 24 19.2/20.4 7.2 80 2.62/2.00
548 R48 48 38.4/40.8 14.4 320 2.60/2.17
560 R60 60 48.0/51.0 18.0 500 2.62/2.20
615 S15 115 92.0/97.8 34.5 1850 2.65/2.22
730 T30 230 184.0/195.5 69.0 7500 2.69/ 2.26
900 V00 400 320.0/340.0 120.0 23500
2)
2.61/2.20
2) Coil resistance ±15%.
All figures are given for coil without pre-energization, at ambient temperature +23°C.
Insulation Data RMC RMD
Initial dielectric strength
between open contacts 1500Vrms 2000Vrms
between contact and coil 2500Vrms 2500Vrms
Initial surge withstand voltage
between contact and coil 6000V (1.2/50µs)
Clearance/creepage
between contact and coil ≥4.0/14.9mm
Material group of insulation parts IIIa
Other Data
Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content
refer to the Product Compliance Support Center at
www.te.com/customersupport/rohssupportcenter
Ambient temperature
for mounting/handling -20 to +40°C
in operation
DC coil -40 to +60°C
AC coil -40 to +40°C
Cold storage, IEC 60068-2-1 Test Aa (-40°C/16h)
Dry heat, IEC 60068-2-2 Test B (+85°C/16h)
Damp heat cyclic,
IEC 60068-2-30, Db, Variant 1 12/12h +25/55°C 2 cycles
Category of environmental protection
IEC 61810 RTI - dust protected
Vibration resistance (functional)
form A (NO)/form B (NC) 10/5 g, 30 to 150Hz
Terminal type quick connect (QC)
Cover retention
pull force 100N
push force 100N
Weight 81g
Packaging unit 10 pcs.
Terminal assignment
Bottom view on pins
1 form Z contact (1 NO + 1 NC), RMC
1 form X contact (1 NO), RMD
Dimensions
Dimensions in mm
Cover with mounting brackets, 6.3 mm quick connect terminals