Datasheet

Datasheet Rev. EK1
Issued 2005/11
www.tycoelectronics.com
www.schrackrelays.com
Dimensions are in mm unless
otherwise specified and are
shown for reference purposes
only.
Product specification
according to IEC 61810-1.
Product data, technical para-
meters, test conditions and
processing information
only to be used together
with the 'Definitions' at
schrackrelays.com in the
‘Schrack’ section.
Specifications subject to
change.
General Purpose Relays
1
Relay Package SNR
I
Relay package consisting of DIN-rail socket and relay
I
1 CO with 6 A rated load
I
Module width only 6.2 mm
I
Reduced system width for increased packing density on the
DIN rail
II
RoHS compliant (Directive 2002/95/EC)
Approvals
Relay: V REG.-Nr. 6666, Z E214024
Socket: V REG.-Nr. 6666, Z 224918
Technical data of approved types on request
Contact data
Contact configuration 1 CO
Contact set single contact
Type of interruption micro disconnection
Rated current 6 A
Rated voltage / max.switching voltage AC 240/400 VAC
Maximum breaking capacity AC 1500 VA
Limiting making capacity, max 4 s, duty factor 10% 10 A
Contact material AgSnO
2
AgSnO
2
gold plated
Minimum contact load 100mA, 12V 50mW
Mechanical endurance 10x10
6
cycles
Rated frequency of operation with / without load 6 /1200 min
-1
Contact ratings
For contact ratings see datasheet Slim Interface Relay SNR
Input data
Rated input voltage DC 12, 24 VDC, 115, 230 VAC/VDC *)
Input power DC coil typ. 170 mW
Operative range 2
*) Version 115, 230 VAC/VDC equipped with 60 VDC relay
Coil versions, DC-coil
Coil Rated Operate Release Coil Rated coil
code voltage voltage voltage resistance power
VDC VDC VDC Ohm mW
LB2 12 8.4 0.6 848+10% 170
LC4 24 16.8 1.2 3390+10% 170
Coil versions, AC-coil 50Hz
Coil Rated Operate Release Coil Rated coil
code voltage voltage voltage resistance power
50 Hz 50 Hz 50 Hz
VAC VAC VAC Ohm mVA
SM5 115 82.0 9.0 not applicable 180
TP0 230 160.0 15.0 not applicable 180
Other coil voltages on request
F0260SA