Datasheet

05-2018, Rev. 0518
www.te.com
© 2015 Tyco Electronics Corporation,
a TE Connectivity Ltd. company
Datasheets and product specification
according to IEC 61810-1 and to be used
only together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ sec-
tion, application notes and all specifications
are subject to change.
3
SCHRACK
General Purpose Relays
PCB Relays
Power PCB Relay RZ (Continued)
12 A, pinning 3.5 mm
1 form C (CO) contact
1 form A (NO) contact
S0418-CB
S0163-BG
S0163-BH
PCB layout / terminal assignment
Bottom view on solder pins
12 A, pinning 5 mm
1 form C (CO) contact
1 form A (NO) contact
S0418-CN
S0163-BC
S0163-BD
Recommended pcb hole for manual mounting:
k1.3mm
For automated mounting please ask for
detailed drawing.
16 A, pinning 5 mm
1 form C (CO) contact
1 form A (NO) contact
S0418-CA
S0163-BE
S0163-BF
Process conditions for Reflow soldering
according to EN61760-1
Product code structure Typical product code RZ 0 3 -1C 4 -D012
Type
RZ Power PCB Relay RZ
Version
0 standard version R reflow version (only with AgNi contacts and reinforced cover)
Version
1 3.5mm pinning, 12 A 3 5 mm double pinning, 16 A
2 5mm pinning, 12 A H High Performance 5mm double pinning, 16 A
Contact configuration
1A 1 form A (1 NO) contact 1C 1 form C (1 CO) contact
Contact material
4 AgNi 90/10 3 AgSnO
2
Coil version
Coil code: please refer to coil versions table
Cover version
blank standard (hot-stamped) R reinforced flux proof (epoxy) and Plug-In capable (only AgNi contact versions)