Datasheet

2
02-2019, Rev. 0219
www.te.com
© 2015 Tyco Electronics Corporation,
a TE Connectivity Ltd. company.
Catalog and product specification according
to IEC 61810-1 and to be used only together
with the ‘Definitions’ section.
Catalog and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Catalog product data, ‘Definitions’ section,
application notes and all specifications are
subject to change.
SCHRACK
General Purpose
Panel/Plug-in Relays
Power Relay RM 5/6/B 3mm (Continued)
Accessories
Sockets for Plug-in version RM**2:
For details see datasheet Accessories Power Relay RM
Note: indicated contact ratings and electrical endurance data for direct
wiring of relays (according IEC 61810-1); for relays mounted on sockets
deratings may apply.
Coil Data (continued)
Coil versions, AC coil
Coil code Rated Operate Release Coil Rated coil
STD LED voltage voltage voltage resistance power
50/60Hz 50/60Hz 50/60Hz
VAC VAC VAC Ω±10%
1)
VA
Coil versions, AC-coil, RM5, RM6
512 R12 12 9.6/10.2 3.6 19.5 2.71/2.27
524 R24 24 19.2/20.4 7.2 80 2.62/2.00
548 R48 48 38.4/40.8 14.4 320 2.60/2.17
560 R60 60 48.0/51.0 18.0 500 2.62/2.20
615 S15 115 92.0/97.8 34.5 1850 2.65/2.22
730 T30 230 184.0/195.5 69.0 7500 2.69/ 2.26
900 V00 400 320.0/340.0 120.0 23500
1)
2.61/2.20
1) Coil resistance ±15%.
All figures are given for coil without pre-energization, at ambient temperature +23°C.
Insulation Data RM5 RM6 RMB
Initial dielectric strength
between open contacts 2500Vrms 2500Vrms 2500Vrms
between contact and coil 2500Vrms 2500Vrms 2500Vrms
between adjacent contacts 2500Vrms 2500Vrms 2500Vrms
Initial surge withstand voltage 4000V 4000V 4000V
between contact and coil 5000V 4000V 4000V
between adjacent contacts, RM5 6000V - -
Clearance/creepage
between contact and coil ≥ 4.0/14.9mm
between adjacent contacts ≥ 6.1/7.3mm
Material group of insulation parts IIIa
Other Data RM5 RM6 RMB
Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content
refer to the Product Compliance Support Center at
www.te.com/customersupport/rohssupportcenter
Ambient temperature
for mounting/handling -20 to 40°C
in operation
DC coil -40 to 50°C -40 to 60°C -40 to 40°C
AC coil -40 to 50°C -40 to 50°C -
Category of environmental protection
IEC 61810 RTI - dust protected
Vibration resistance (functional) 12 g, 30 to 150 Hz
Terminal type PCB-THT, plug-in,
quick-connect (QC)
Cover retention, pull/push force 100/100N
Mounting position versions with test button not to be
mounted with button on top
Weight 81g
Resistance to soldering heat THT
IEC 60068-2-20 270°C/10s
Packaging unit 10/25 pcs.
PCB layout / terminal assignment
Bottom view on pins
3 form A (3 NO) contacts
2 form A (2 NO) contacts