Datasheet

3
12-2017, Rev. 1217
www.te.com
© 2014 Tyco Electronics Corporation,
a TE Connectivity Ltd. company.
Catalog and product specification according
to IEC 61810-1 and to be used only together
with the ‘Definitions’ section.
Catalog and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Catalog product data, ‘Definitions’ section,
application notes and all specifications are
subject to change.
SCHRACK
General Purpose
RT-iPower
Power PCB Relay RT Inrush Power (Continued)
Terminal assignment
Bottom view on solder pins
a)
a) Indicated contact position during or after coil
energization with reset voltage.
b) for 2 coil version only
monostable version
Dimensions / PCB layout
16 A, pinning 5 mm
S0272-BW
*) With the recommended PCB hole
sizes a grid pattern from 2.5 mm to
2.54 mm can be used.
version without test tab
version with test tab
b) for 2 coil version only
bistable version