Datasheet
Datasheet Rev. FC1
Issued 2006/03
www.tycoelectronics.com
www.schrackrelays.com
Dimensions are in mm unless
otherwise specified and are
shown for reference purposes
only.
Product specification
according to IEC 61810-1.
Product data, technical para-
meters, test conditions and
processing information
only to be used together
with the 'Definitions' at
schrackrelays.com in the
‘Schrack’ section.
Specifications subject to
change.
General Purpose Relays
1
Safety Relay SR6
I
6 pole safety relay with either
4 NO+2 NC or 3 NO+3 NC or 5 NO+1 NC contacts
I
Forcibly guided contacts according to EN50205
I
Rated current 8 A
I
coil power 800 mW or 1200 mW
I
RoHS compliant (Directive 2002/95/EC)
Applications
Emergency shut-off, press control, machine control, elevator
and escalator control, safety modules
F0206-DS
Approvals (in preperation)
V REG.-Nr. 128935, Z E214024, T
Technical data of approved types on request
Contact data
Contact configuration 3 NO contacts and 3 NC contacts
4 NO contacts and 2 NC contacts
5 NO contacts and 1 NC contact
Contact set single contact, forcibly guided
type A according to EN 50205
Type of interruption micro disconnection
Rated current 8 A
Rated voltage / max.switching voltage AC 240 / 400 VAC
Maximum breaking capacity AC 2000 VA
Contact material 800 mW version AgSnO
2
+ 0,2 μm Au
1200 mW version AgSnO
2
Minimum contact load 10 mA / 5 V
Contact resistance w 100 mOhm / 1 A / 24 VDC
w 20 Ohm / 10 mA / 5 VDC
Mechanical endurance 10x10
6
cycles
Rated frequency of operation with / without load 6 min
-1
/ 150 min
-1
Contact ratings
Type Load Cycles
SR6 NO contact 8A, 250VAC, resistiv, 70°C, EN61810-1 50x10
3
SR6 NC contact 8A, 250VAC, resistiv, 70°C, EN61810-1 20x10
3
SR6 NO contact 5A, 250VAC, AC15, 70°C, EN60947-5-1 50x10
3
SR6 NO contact 5A, 24VDC, DC13, 25°C, EN60947-5-1 45x10
3
Coil data 800 mW 1200 mW
Rated coil voltage range DC coil 5...110 VDC
Coil power DC coil appr. 800 mW appr. 1200 mW
Operative range 2
Coil versions, 800 mW, DC-coil
Coil code Nominal Pull-in Release Coil Rated coil
Order. code voltage voltage voltage resistance power
block 4 VDC VDC VDC c mW
K05 5 3.8 0.5 31+10% 806
K06 6 4.5 0.6 45+10% 800
K09 9 6.8 0.9 101+10% 802
K12 12 9.0 1.2 180+10% 800
K18 18 13.5 1.8 405+10% 800
K21 21 15.8 2.1 551+10% 800
K24 24 18.0 2.4 720+10% 800
K36 36 27.0 3.6 1620+10% 800
K40 40 30.0 4.0 2000+10% 800
K48 48 36.0 4.8 2880+10% 800
K60 60 45.0 6.0 4500+10% 800
K85 85 63.8 8.5 9031+10% 800
L10 110 82.5 11.0 15130+10% 800
All figures are given for coil without preenergization, at ambient temperature +23°C
Other coil voltages on request