Product Manual

21
To replace the battery, turn the transmitter off, remove the four screws on the front panel’s
battery compartment and expose the battery by removing the cover. Gently flip the unit over
to let the battery pack drop off into your hand and expose the connector to the main PC
board. Reach into the compartment and unplug the connector to disconnect the existing
battery (as shown in the below images).
Plug the new battery in (the connector is polarized and will plug only one way) until you hear
it click into position. Let the wire fold into the compartment, under the battery, and place
the new battery in the compartment. Then, replace the cover and the screws.
CAUTION
When replacing the transmitter
battery, only use Schonstedt
batteries!