Schonstedt Instruction Manual



To replace the battery, turn the transmitter off, remove the four screws on the front

panel’s battery compartment and expose the battery by removing the cover. Gently

flip the unit over to let the battery pack drop off into your hand and expose the

connector to the main PC board. Reach into the compartment and unplug the

connector to disconnect the existing battery (as shown in the below images).

Plug the new battery in (the connector is polarized and will plug only one way) until

you hear it click into position. Let the wire fold into the compartment, under the

battery, and place the new battery in the compartment. Then, replace the cover

and the screws.