Operation Manual

- 12 -

Création cooking

Starting a Création cooking

When you start with a cold oven, place your dish inside it and proceed with the following settings:

• Turn knob A towards the right to light symbol ,

• Turn knob B to light the symbol corresponding to the chosen cooking mode,

• Press knob B to confirm the function.

If you want to start with a pre-heated oven, wait until pre-heating is complete (a series of beeps will sound) and then

place your dish in the oven.

For example:

Adjusting the temperature

The temperature is pre-set for each cooking. You can adjust the temperature at any time during cooking:

• Turn knob A towards the right to light symbol ,

• Turn knob B until the display indicates the desired temperature,

• Press knob B to confirm the adjustment.

NOTE

During the pre-heating process, the display indicates PREHEATING IN PROGRESS and during cooking, COOKING

IN PROGRESS.

Turning off the oven

When cooking is complete, turn knob A towards the left to display STOP and then press knob A or B.

You may also turn knob A towards the right until icon is displayed and then press knob A or B.

NOTE

If you wish to use the "Dough proving", "Meringues", "Defrosting", "Low temperature", "Reheating" and "Pasteurisation"

functions when the oven is hot, a series of beeps sounding and the display of OVEN TOO HOT means you cannot

place your dish in the oven.

Turn your oven off and try again later.