Product Manual

Configuration via SCP
4–34 975-0636-01-01 Rev E
3. Restore the system to Operating mode. See “To change an operational
setting:” on page 3–17.
NOTICE
EQUIPMENT DAMAGE
Do not change the frequency to 60 Hz unless the equipment and appliances
connected to the inverter’s output can operate in this frequency setting.
Failure to follow these instructions can result in equipment damage.
IMPORTANT: Restoring to default (see “Restoring Factory Default Settings” on
page 4–32) means that the AC output frequency will change back to 50 Hz.
ConextSWEUROwnersGuide.book Page 34 Thursday, July 23, 2015 3:32 PM