Product Manual

Operation
3–14 975-0636-01-01 Rev E
Meters Screen The Meters screen displays total system power production, generator voltage
and current status, and load voltage and current status.
To view the Meters screen:
◆ On the Conext SW Setup menu highlight Meters, and then press Enter.
Figure 3-6 Viewing the Meters Screen
Tabl e 3-3 Meters Screen
Screen Item Description
Mode Operating state of the Conext SW. See also “Conext SW Home
Screen States” on page 3–12.
Battery Displays battery voltage, charging current and battery
temperature. The battery temperature comes from the BTS,
connected to the Conext SW. If the BTS is not installed, Battery
shows as N/A, that is, not available.
Load Displays power consumption (watts), voltage (volts), and
current (amps) supplied to the AC loads.
AC In AC input current, voltage, and frequency connected to the
Conext SW AC INPUT L terminal.
CSW4024E 00: Setup
Meters
Inverter
Search Mode
Charger
Force Chg State
Equalize
Mode
Clear Faults/Warnings
View Device Info
Basic Settings
[Enabled]
[Disabled]
[Enabled]
[Disabled]
[Operating]
CSW4024E 00: Meters
Mode
Battery
Load
AC In
ACGood
23.9V 0.0A N/A
450W 230V 1.8A
1.6A 231V 50Hz
ConextSWEUROwnersGuide.book Page 14 Thursday, July 23, 2015 3:32 PM