Product Manual

Introduction
1–2 975-0636-01-01 Rev E
Materials List
Congratulations on your purchase of the Conext SW Inverter/Charger (called
Conext SW). The Conext SW has been designed to give you premium true sine
wave power, ease of use, and outstanding reliability for your off-grid and power
backup applications.
The Conext SW ships with the following items:
• One Conext SW unit
• One set of owner’s and installation guides
• One Battery Temperature Sensor (BTS)
• Two Xanbus network terminators
• Two sets of
5/16 "-18 nuts and washers for the DC terminals
• Two DC terminal covers (red and black) with two sets of #6-32 screws
• One Installation bracket with one set of M6 nuts for mounting (not shown)
NOTE: If any of the supplied accessories are missing, contact customer
service for replacement. See “Contact Information solar.schneider-electric.com”
on page ii.
Figure 1-1 Materials List
ConextSWEUROwnersGuide.book Page 2 Thursday, July 23, 2015 3:32 PM